I design and build pergolas across Sydney’s Eastern Suburbs. Freestanding or attached to the house. Open rafters, or a roof if you want shade and weather cover.
Most frames are hardwood. Aluminium is the other option. On the roof I use standard polycarbonate, EzGlaze, or insulated panels (typically Versiclad). I measure it on site, I draw it, and I build it.
Doing this in Sydney’s East and surrounds for 13+ years. The person at the consultation is the person on the tools.
Rafters only. No sheets. Shade from the timber, light through the gaps, room for a climber if you want one. Often the right call over a deck that already gets cover from the house. That is the one to look at if you want this structure.
A standard polycarbonate roof on a timber or aluminium frame. Light comes through. Rain does not. Usable outdoor table without closing the space in. That is the one to look at if you want this roof.
EzGlaze is the thicker polycarbonate sheet. It spans further and reads cleaner overhead. The Mascot rooftop I rebuilt has EzGlaze over 7.2 metre clear spans. That is the one to look at if you want this roof.
Insulated panels, typically Versiclad, when you want a solid roof and less heat through it. The Coogee outdoor kitchen sits under insulated panel roofing. That is the one to look at if you want this roof.
I install ZipScreens on the pergola so you can shut out wind, rain or the afternoon sun without building a room.
Hardwood posts and beams are what I use on most pergolas. They sit well against a timber deck and against older Eastern Suburbs houses.
Aluminium is the other frame. Cleaner lines, less movement, and it is often the better match to a composite deck or a tighter modern house. I will tell you which one I would use on your site.
A consultation at your place. I look at the span, the fixings back to the house or the footings, sun, and how you actually want to use the space. Then I write a fixed price and a full scope.
I build it myself. Footings or connections, frame, roof, flashings, and the last fix.
These are live jobs. The pergola is part of a larger outdoor build on each of them.
What a pergola costs in Sydney, and whether to build the deck or the pergola first, are in How Much Does a Pergola Cost in Sydney and Deck vs Pergola.
I build pergolas in Bondi, North Bondi, Coogee, Bronte, Maroubra, Randwick, Vaucluse, Rose Bay, Double Bay, Dover Heights, Tamarama, Little Bay, Malabar, Botany, Pagewood, Kingsford and Kensington.
If you want the local write-up, start with the Coogee, Bronte or Mascot jobs above.
I’m a licensed NSW carpenter, licence 272840C, with 13+ years building outdoor structures around Sydney. The person at the consultation is the person on the tools.
The Decksmith covers all residential work excluding Class 2 building works typically classified as apartments and units.
Ready to get started?
A consultation at your place. Fixed price, full scope written out. No pressure, no obligation.
Get a Consultation →Or call Greg directly: 0468 486 290
Open (rafters only), standard polycarbonate, EzGlaze, and insulated panels (typically Versiclad). Frames in timber or aluminium. I install ZipScreens where you want the sides closed in. I will tell you which combination I would use on your site.
Yes. Vaucluse, Dover Heights and the rest of the Eastern Suburbs list above. Exposed and harbourside sites are normal work, not a special trip.
A consultation on site. I measure, check the structure, and write a fixed price. Then I build it, from the footings or the house connection through to the roof and the last fix.
Yes, attached or freestanding. On a lot of jobs the pergola goes on a deck I have already built, or it goes up with the deck in the same scope.